Uploaded image for project: 'Data Management'
  1. Data Management
  2. DM-13326

feedback on the circle selection DM-6929

    XMLWordPrintable

Details

    • Improvement
    • Status: Done
    • Resolution: Done
    • None
    • Firefly

    Description

      The following are from IRSA tester feedback ticket: https://caltech-ipac.atlassian.net/browse/IRSA-1402

      1. I have the same comment for zoom to fit selected area. It was really hard to see what just happened. Would be easier if the circle would just stay put.
      2. When I crop, the circular region disappears and the icon turns back into a square. I found this quite jarring because I couldn't quite tell how the square crop compared to the elliptical region. Enclosed or bounded? It would be better if it stayed until I turned it off.
      3. Recenter image to selected area didn't do what I expected it to do. I thought it would put the center of the ellipse in the middle of the frame, but it didn't. I'm not sure what happened. However, the circle didn't go away this time!
      4. When I have a catalog overlay and an elliptical region, I can successfully filter the catalog on that region. However, I cannot then click on any of the overlay points to select them. I have to get rid of the elliptical region by clicking on the image toolbar. And then I can't get that region back. (will be fixed in DM-13337)
      5. The layers text is incomplete, "Click and drag a corner to resize selection area,
        then choose from Opt". It seems like there's supposed to be more text, but if so
        there's no way to see it.
        -

      Attachments

        Issue Links

          Activity

            No builds found.
            xiuqin Xiuqin Wu [X] (Inactive) created issue -
            xiuqin Xiuqin Wu [X] (Inactive) made changes -
            Field Original Value New Value
            Issue Type Story [ 10001 ] Improvement [ 4 ]
            xiuqin Xiuqin Wu [X] (Inactive) made changes -
            Description The following are from IRSA tester feedback ticket: https://caltech-ipac.atlassian.net/browse/IRSA-1402
             - When I crop, the circular region disappears and the icon turns back into a square. I found this quite jarring because I couldn't quite tell how the square crop compared to the elliptical region. Enclosed or bounded? It would be better if it stayed until I turned it off.

             - I have the same comment for zoom to fit selected area. It was really hard to see what just happened. Would be easier if the circle would just stay put.

             - Recenter image to selected area didn't do what I expected it to do. I thought it would put the center of the ellipse in the middle of the frame, but it didn't. I'm not sure what happened. However, the circle didn't go away this time!
             - When I have a catalog overlay and an elliptical region, I can successfully filter the catalog on that region. However, I cannot then click on any of the overlay points to select them. I have to get rid of the elliptical region by clicking on the image toolbar. And then I can't get that region back.
             - The layers text is incomplete, "Click and drag a corner to resize selection area,
            then choose from Opt". It seems like there's supposed to be more text, but if so
            there's no way to see it.
             -
            The following are from IRSA tester feedback ticket: [https://caltech-ipac.atlassian.net/browse/IRSA-1402]
             # I have the same comment for zoom to fit selected area. It was really hard to see what just happened. Would be easier if the circle would just stay put.
             # When I crop, the circular region disappears and the icon turns back into a square. I found this quite jarring because I couldn't quite tell how the square crop compared to the elliptical region. Enclosed or bounded? It would be better if it stayed until I turned it off.
             # Recenter image to selected area didn't do what I expected it to do. I thought it would put the center of the ellipse in the middle of the frame, but it didn't. I'm not sure what happened. However, the circle didn't go away this time!
             # When I have a catalog overlay and an elliptical region, I can successfully filter the catalog on that region. However, I cannot then click on any of the overlay points to select them. I have to get rid of the elliptical region by clicking on the image toolbar. And then I can't get that region back.
             # The layers text is incomplete, "Click and drag a corner to resize selection area,
             then choose from Opt". It seems like there's supposed to be more text, but if so
             there's no way to see it.
             -
            xiuqin Xiuqin Wu [X] (Inactive) made changes -
            Description The following are from IRSA tester feedback ticket: [https://caltech-ipac.atlassian.net/browse/IRSA-1402]
             # I have the same comment for zoom to fit selected area. It was really hard to see what just happened. Would be easier if the circle would just stay put.
             # When I crop, the circular region disappears and the icon turns back into a square. I found this quite jarring because I couldn't quite tell how the square crop compared to the elliptical region. Enclosed or bounded? It would be better if it stayed until I turned it off.
             # Recenter image to selected area didn't do what I expected it to do. I thought it would put the center of the ellipse in the middle of the frame, but it didn't. I'm not sure what happened. However, the circle didn't go away this time!
             # When I have a catalog overlay and an elliptical region, I can successfully filter the catalog on that region. However, I cannot then click on any of the overlay points to select them. I have to get rid of the elliptical region by clicking on the image toolbar. And then I can't get that region back.
             # The layers text is incomplete, "Click and drag a corner to resize selection area,
             then choose from Opt". It seems like there's supposed to be more text, but if so
             there's no way to see it.
             -
            The following are from IRSA tester feedback ticket: [https://caltech-ipac.atlassian.net/browse/IRSA-1402]
             # I have the same comment for zoom to fit selected area. It was really hard to see what just happened. Would be easier if the circle would just stay put.
             # When I crop, the circular region disappears and the icon turns back into a square. I found this quite jarring because I couldn't quite tell how the square crop compared to the elliptical region. Enclosed or bounded? It would be better if it stayed until I turned it off.
             # Recenter image to selected area didn't do what I expected it to do. I thought it would put the center of the ellipse in the middle of the frame, but it didn't. I'm not sure what happened. However, the circle didn't go away this time!
             # When I have a catalog overlay and an elliptical region, I can successfully filter the catalog on that region. However, I cannot then click on any of the overlay points to select them. I have to get rid of the elliptical region by clicking on the image toolbar. And then I can't get that region back. (will be fixed in DM-1337)
             # The layers text is incomplete, "Click and drag a corner to resize selection area,
             then choose from Opt". It seems like there's supposed to be more text, but if so
             there's no way to see it.
             -
            xiuqin Xiuqin Wu [X] (Inactive) made changes -
            Assignee Cindy Wang [ cwang ]
            xiuqin Xiuqin Wu [X] (Inactive) made changes -
            Epic Link DM-8396 [ 28007 ]
            xiuqin Xiuqin Wu [X] (Inactive) made changes -
            Sprint SUIT Sprint 2018-02 [ 662 ]
            Story Points 4
            ejoliet Emmanuel Joliet made changes -
            Link This issue is triggered by DM-6929 [ DM-6929 ]
            xiuqin Xiuqin Wu [X] (Inactive) made changes -
            Labels FireflyCCB
            cwang Cindy Wang [X] (Inactive) made changes -
            Status To Do [ 10001 ] In Progress [ 3 ]
            cwang Cindy Wang [X] (Inactive) made changes -
            Reviewers Trey Roby, Xiuqin Wu [ roby, xiuqin ]
            Status In Progress [ 3 ] In Review [ 10004 ]
            cwang Cindy Wang [X] (Inactive) made changes -
            Description The following are from IRSA tester feedback ticket: [https://caltech-ipac.atlassian.net/browse/IRSA-1402]
             # I have the same comment for zoom to fit selected area. It was really hard to see what just happened. Would be easier if the circle would just stay put.
             # When I crop, the circular region disappears and the icon turns back into a square. I found this quite jarring because I couldn't quite tell how the square crop compared to the elliptical region. Enclosed or bounded? It would be better if it stayed until I turned it off.
             # Recenter image to selected area didn't do what I expected it to do. I thought it would put the center of the ellipse in the middle of the frame, but it didn't. I'm not sure what happened. However, the circle didn't go away this time!
             # When I have a catalog overlay and an elliptical region, I can successfully filter the catalog on that region. However, I cannot then click on any of the overlay points to select them. I have to get rid of the elliptical region by clicking on the image toolbar. And then I can't get that region back. (will be fixed in DM-1337)
             # The layers text is incomplete, "Click and drag a corner to resize selection area,
             then choose from Opt". It seems like there's supposed to be more text, but if so
             there's no way to see it.
             -
            The following are from IRSA tester feedback ticket: [https://caltech-ipac.atlassian.net/browse/IRSA-1402]
             # I have the same comment for zoom to fit selected area. It was really hard to see what just happened. Would be easier if the circle would just stay put.
             # When I crop, the circular region disappears and the icon turns back into a square. I found this quite jarring because I couldn't quite tell how the square crop compared to the elliptical region. Enclosed or bounded? It would be better if it stayed until I turned it off.
             # Recenter image to selected area didn't do what I expected it to do. I thought it would put the center of the ellipse in the middle of the frame, but it didn't. I'm not sure what happened. However, the circle didn't go away this time!
             # When I have a catalog overlay and an elliptical region, I can successfully filter the catalog on that region. However, I cannot then click on any of the overlay points to select them. I have to get rid of the elliptical region by clicking on the image toolbar. And then I can't get that region back. (will be fixed in DM-13337)
             # The layers text is incomplete, "Click and drag a corner to resize selection area,
             then choose from Opt". It seems like there's supposed to be more text, but if so
             there's no way to see it.
             -
            cwang Cindy Wang [X] (Inactive) added a comment - The above issues 1-5 is resolved by https://github.com/Caltech-IPAC/firefly/pull/543  
            cwang Cindy Wang [X] (Inactive) made changes -
            Status In Review [ 10004 ] Reviewed [ 10101 ]
            cwang Cindy Wang [X] (Inactive) made changes -
            Resolution Done [ 10000 ]
            Status Reviewed [ 10101 ] Done [ 10002 ]

            People

              cwang Cindy Wang [X] (Inactive)
              xiuqin Xiuqin Wu [X] (Inactive)
              Trey Roby, Xiuqin Wu [X] (Inactive)
              Cindy Wang [X] (Inactive), Emmanuel Joliet, Gregory Dubois-Felsmann, Trey Roby, Xiuqin Wu [X] (Inactive)
              Votes:
              0 Vote for this issue
              Watchers:
              5 Start watching this issue

              Dates

                Created:
                Updated:
                Resolved:

                Jenkins

                  No builds found.